Power to Win
Engine Control
Connector pin assignment and functions.
| Pin | Description | Comments |
| A .. | Ignition 1 | See notes |
| B .. | Ignition 2 | |
| C .. | Ignition 3 | |
| D .. | Ignition 4 | |
| E .. | Ignition 5 | |
| F .. | Ignition 6 | |
| G .. | Ignition 7 | |
| H .. | Ignition 8 | |
| J .. | Ignition 9 | |
| K .. | Ignition 10 | |
| L .. | Not used | |
| M .. | CDI Temperature | |
| N .. | 12v SW | |
| P .. | Tach Output | 12 volt rising edge |
| R .. | VBAT | |
| S .. | VBAT | |
| T .. | Signal GND | This pin MUST be connected directly to the ECU. |
| U .. | PWR GND | |
| V .. | PWR GND |
| Pin | Description | Comments |
| A .. | Coil 1 | See notes |
| B .. | Coil 2 | |
| C .. | Coil 3 | |
| D .. | Coil 4 | |
| E .. | Coil 5 | |
| F .. | Coil 6 | |
| G .. | Coil 7 | |
| H .. | Coil 8 | |
| J .. | Coil 9 | |
| K .. | Coil 10 | |
| L .. | Not used | |
| M .. | Coil GND | |
| N .. | Coil GND | |
| P .. | Block GND | |
| R .. | Block GND |