Overview Engineering History Locations
Overview Enquiries Distributors Support Employment Newsletter
Overview News Race Results Photo Gallery
Overview Price Guide Software Licensing Data Sheets Technical Articles
Overview Engine Control Ignitions Data Acquisition Dash Displays Telemetry Systems Sensors Wire Harnesses Lambda Kits Pressure Regulators Crank Triggers
Overview Aerospace Marine Sportscar Offroad Motorcycle Drag Racing Vintage Circle Track Military
  • Contact |  
  • Products |  
  • Software |  
  • Photo Gallery
  • Home >
  • Products >
  • Ignitions >
  • VR1 Ignition


PRODUCTS

  • Overview
  • Engine Control
  • Ignitions
    • R1i
    • Single Channel
    • Four Channel
    • Eight Channel
    • Ten Channel
    • Superstock
    • Vintage (VR1)
  • Data Acquisition
  • Dash Displays
  • Telemetry Systems
  • Sensors
  • Wire Harnesses
  • Lambda Kits
  • Pressure Regulators
  • Crank Triggers

VR1 (Vintage) : Part # R051-013


The VR1 is a compact single output Capacitive Discharge Ignition system that is designed as a direct replacement unit for the Lucas ignition box used on all Cosworth engines.

The Ignition is designed to be installed inside the stock Lucas housing and features built in voltage regulator and adjustable rev-limiter.

By using the supplied harness adaptor the Ignition connects to the stock Lucas connectors making it plug and play with existing equipment.

Features

The CDI has the following features:-

  • Compact design
  • High primary output
  • Low power consumption
  • High RPM operation
  • Transient protected
  • Reverse polarity protection
  • Tachometer output
  • Low Voltage operation
  • Voltage Regulator
  • Adjustable rev-limiter

Design

The VR1 CDI utilizes a proprietary high efficiency transformer and power stage design that allows full operation down to 10 volts.

Its compact design features an integrated heatsink with mil-spec connector allowing for a small lightweight package with high output.

Performance Data

  • 14,500 max RPM range
  • 8A load at 10,000 rpm
  • 450 volts primary
  • 45kV secondary
  • 105mj spark energy
  • Rising edge trigger

Applications


Operational

Enclosure: Billet 6061 Aluminum
Construction: CMOS surface mount design
Environmental: Environmentally sealed
Connector: Mil-Spec 12 pin
Dimensions: 4.70" x 2.80" x 1.40"
Weight: 1.00 lbs
Power Supply: 10 to 18 volts transient protected
Power Consumption: 0.5 watt @ 14 volts
Operating Temp: -40 to +85 deg C continuous
EMI Protection: Exceeds 100V/m >1GHz

Contact

For further information on this and other products please contact us directly at sales@efitechnology.com.


 Superstock : Part # R051-014
X

  > Click image to enlarge


DOWNLOADS

  •   Product Data Sheet
  •   Installation Instructions
  •   Wiring Diagram
  •   CDI Connector Pinout


LIKE THIS PAGE

Tweet
  • Site map
  • Terms of Use
  • Privacy
  • Contact
  • Products
  • Employment
  • Terms & Conditions
  • About
  • News Articles
  • © Copyright 2024 EFI Technology Inc.