Overview Engineering History Locations
Overview Enquiries Distributors Support Employment Newsletter
Overview News Race Results Photo Gallery
Overview Price Guide Software Licensing Data Sheets Technical Articles
Overview Engine Control Ignitions Data Acquisition Dash Displays Telemetry Systems Sensors Wire Harnesses Lambda Kits Pressure Regulators Crank Triggers
Overview Aerospace Marine Sportscar Offroad Motorcycle Drag Racing Vintage Circle Track Military
  • Contact |  
  • Products |  
  • Software |  
  • Photo Gallery
  • Home >
  • Products >
  • Data Acquisition


PRODUCTS

  • Overview
  • Engine Control
  • Ignitions
  • Data Acquisition
    • GT Logger
    • QD2
    • Level 3
    • Level 4
    • Expansion
    • Beacon kits
  • Dash Displays
  • Telemetry Systems
  • Sensors
  • Wire Harnesses
  • Lambda Kits
  • Pressure Regulators
  • Crank Triggers

DATA ACQUISITION


GT Logger : Part # R73-059

The GT Logger is a compact 8 analog, 2 digital channel system that is expandable to 32 channels via junction boxes. Additional channels are available using the high speed CAN bus.

  • Analog Inputs: 8 channels 0-5 volt
  • Digital Inputs: 2 digital
  • Memory: 1MB (expandable to 4MB)
  • Expansion: 2 Junction boxes
  • Outputs: 2 programmable
  • Sample Rates: 1 to 1000 Hz

see details ...

QD2 : Part Number # R73-060

The QD2 Logger is a low cost compact 24 analog, 2 digital channel system available with 1MB or 4MB of memory. Internal expansion cards allow direct input from EGT and thermister sensors.

  • Analog Inputs: 30 channels 0-5 volt
  • Digital Inputs: 2 digital
  • Memory: 1MB (expandable to 4MB)
  • Expansion: 12 channel EGT card
  • Outputs: 2 programmable
  • Sample Rates: 1 to 1000 Hz

see details ...

Level 3 : Part # R73-048

The Level 3 Logger is a high performance 20 analog, 6 digital channel system that is expandable to 52 channels via junction boxes. Available with 16MB of memory expandable to 64MB.

  • Analog Inputs: 20 channels 0-5 volt
  • Digital Inputs: 6 digital
  • Memory: 16MB (expandable to 64MB)
  • Expansion: 4 junction boxes
  • Outputs: 4 programmable
  • Sample Rates: 1 to 1000 Hz

see details ...

Level 4 : Part # R73-041

The Level 4 Logger is a high performance 32 analog, 8 digital channel system that is expandable to 64 channels via junction boxes. Available with 32MB of memory expandable to 128MB.

  • Analog Inputs: 32 channels 0-5 volt
  • Digital Inputs: 8 digital
  • Memory: 16MB (expandable to 128MB)
  • Expansion: 4 junction boxes
  • Outputs: 4 programmable
  • Sample Rates: 1 to 1000 Hz

see details ...

Junction Box : Part # R73-044

Junction boxes allow additional channels to be input to the data logger. Each units adds 8 analog channels that can be configured as 0-5 volt inputs or amplified with programmable gains.

  • Analog Inputs: 8 channel 0-5 volt
  • Digital Inputs: 2 digital
  • Optional Inputs: Strain gauge or thermocouple
  • Enclosure: Billet 6061
  • Connectors: 3 Autosport

see details ...

Beacon RX : Part # R73-051

The EFI beacon receiver is a 16 channel infra red detector that triggers end of lap signals to the logger as it passes the track side beacon transmitter. Split beacons can also be detected using the optional 32 channel version

  • RX channels: 16 channel
  • Outputs: End of lap & Split
  • Detector: 32 bit infra red
  • Enclosure: Billet 6061
  • Connectors: 1 Autosport

see details ...

  • Site map
  • Terms of Use
  • Privacy
  • Contact
  • Products
  • Employment
  • Terms & Conditions
  • About
  • News Articles
  • © Copyright 2024 EFI Technology Inc.