Overview Engineering History Locations
Overview Enquiries Distributors Support Employment Newsletter
Overview News Race Results Photo Gallery
Overview Price Guide Software Licensing Data Sheets Technical Articles
Overview Engine Control Ignitions Data Acquisition Dash Displays Telemetry Systems Sensors Wire Harnesses Lambda Kits Pressure Regulators Crank Triggers
Overview Aerospace Marine Sportscar Offroad Motorcycle Drag Racing Vintage Circle Track Military
  • Contact |  
  • Products |  
  • Software |  
  • Photo Gallery
  • Home >
  • Products >
  • Lambda Kits >
  • 2 Channel


PRODUCTS

  • Overview
  • Engine Control
  • Ignitions
  • Data Acquisition
  • Dash Displays
  • Telemetry Systems
  • Sensors
  • Wire Harnesses
  • Lambda Kits
    • 1 channel
    • 2 channel
    • 4 channel
    • 8 channel
  • Pressure Regulators
  • Crank Triggers

Xw Lambda : Part # R060-656


The Xw lambda amp is a compact dual channel NGK lambda amplifier with built in heater control circuit and 0-5 volt outputs.

The enclosure is extruded machined 6061 aluminium that is environmentally sealed and features an automotive grade connector.

Features

The Xw has the following features:-

  • NGK/NTK compatible
  • Compact design
  • Self calibrating inputs
  • Reverse polarity protection
  • 0-5 volt outputs
  • Battery status LED
  • Heater circuit indicator
  • Low power consumption

Also availailable as a single channel unit

Calibration

The Xw lambda amp is self calibrating and does not require any free air calibration methods. It will integrate with any EFI Technology ECU directly for closed loop control and/or lambda monitoring.

Installation

The Xw amp has a lambda range of 0.60 to 1.875 (8.80 to 18.5 AFR) in gasoline. The Xw can also be used with Methanol by simply changing the ECU calibration table.

The Xw amp can also be connected to any data logger or dyno using its 0-5 volt outputs. For further information on calibrations please contact us at support@efitechnology.com.

Operational

Enclosure: Extruded 6061 Aluminum
Construction: CMOS surface mount design
Environmental: Environmentally sealed
Connector: Automotive 20 pin
Dimensions: 3.10" x 2.80" x 0.90"
Weight: 0.20 lbs
Power Supply: 10 to 18 volts transient protected
Power Consumption: 0.2 watt @ 14 volts
Operating Temp: -40 to +70 deg C continuous
EMI Protection: Exceeds 100V/m >1GHz

Contact

For further information on this and other products please contact us directly at sales@efitechnology.com.


 Xw Lambda : Part # R060-656
X

  > Click image to enlarge


DOWNLOADS

  •   Product Data Sheet
  •   Installation Instructions
  •   Calibration Data
  •   Wiring Information


LIKE THIS PAGE

Tweet
  • Site map
  • Terms of Use
  • Privacy
  • Contact
  • Products
  • Employment
  • Terms & Conditions
  • About
  • News Articles
  • © Copyright 2024 EFI Technology Inc.