Overview Engineering History Locations
Overview Enquiries Distributors Support Employment Newsletter
Overview News Race Results Photo Gallery
Overview Price Guide Software Licensing Data Sheets Technical Articles
Overview Engine Control Ignitions Data Acquisition Dash Displays Telemetry Systems Sensors Wire Harnesses Lambda Kits Pressure Regulators Crank Triggers
Overview Aerospace Marine Sportscar Offroad Motorcycle Drag Racing Vintage Circle Track Military
  • Contact |  
  • Products |  
  • Software |  
  • Photo Gallery
  • Home >
  • Products >
  • Engine Control >
  • Expansion


PRODUCTS

  • Overview
  • Engine Control
    • R2 ECU
    • R8 ECU
    • R16 ECU
    • R1 ECU
    • XWE
    • XTR ECU
    • X2 ECU
  • Ignitions
  • Data Acquisition
  • Dash Displays
  • Telemetry Systems
  • Sensors
  • Wire Harnesses
  • Lambda Kits
  • Pressure Regulators
  • Crank Triggers

Expansion Module : Part # R050-803


The Expansion Module is an digital/analog channel extender that adds inputs to any of the R Series ECU's via the CAN bus.

The enclosure is extruded machined 6061 aluminium that is environmentally sealed and features automotive grade connectors.

It comes as standard with an internal 3 axis accelerometer, 4 digital and 16 analog inputs. All analog inputs are 0-5 volt but can be configured to match other sensor combinations.

Features

The Module has the following features:-

  • Internal 3 axis G sensor
  • 4 Digital inputs
  • 16 Analog inputs
  • 4 Auxiliary outputs
  • Compact design
  • Reverse polarity protection
  • 0-5 volt inputs
  • Battery status LED
  • CAN bus interface

Calibration

The Digital inputs can be calibrated as either rpm, speed, frequency or pulse count inputs. The analog channels are all 0-5 volt inputs. Custom ranges are availble on request.

Installation

The Module has an internal 3 axis accelerometer and should be mounted with the main connector facing the rear of the vehicle for correct sensor orientation. All 3 sensors have a range of +/- 8 G's.

Interface

This Module can also be connected to any 3rd party data logger or dyno using its CAN interface. For further information on the CAN protocol details and calibrations please contact us at support@efitechnology.com.

Operational

Enclosure: Extruded 6061 Aluminum
Construction: CMOS surface mount design
Environmental: Environmentally sealed
Connector: Automotive 32 & 16 pin
Dimensions: 4.70" x 3.00" x 1.05"
Weight: 0.30 lbs
Power Supply: 10 to 18 volts transient protected
Power Consumption: 0.3 watt @ 14 volts
Operating Temp: -40 to +70 deg C continuous
EMI Protection: Exceeds 100V/m >1GHz

Contact

For further information on this and other products please contact us directly at sales@efitechnology.com.


 Expansion : Part # R050-083
X

  > Click image to enlarge


DOWNLOADS

  •   Product Data Sheet
  •   Installation Drawing


LIKE THIS PAGE

Tweet
  • Site map
  • Terms of Use
  • Privacy
  • Contact
  • Products
  • Employment
  • Terms & Conditions
  • About
  • News Articles
  • © Copyright 2024 EFI Technology Inc.