Overview Engineering History Locations
Overview Enquiries Distributors Support Employment Newsletter
Overview News Race Results Photo Gallery
Overview Price Guide Software Licensing Data Sheets Technical Articles
Overview Engine Control Ignitions Data Acquisition Dash Displays Telemetry Systems Sensors Wire Harnesses Lambda Kits Pressure Regulators Crank Triggers
Overview Aerospace Marine Sportscar Offroad Motorcycle Drag Racing Vintage Circle Track Military
  • Contact |  
  • Products |  
  • Software |  
  • Photo Gallery
  • Home >
  • Products >
  • Engine Control >
  • X2 ECU


PRODUCTS

  • Overview
  • Engine Control
    • R2 ECU
    • R8 ECU
    • R16 ECU
    • R1 ECU
    • XWE
    • XTR ECU
    • X2 ECU
  • Ignitions
  • Data Acquisition
  • Dash Displays
  • Telemetry Systems
  • Sensors
  • Wire Harnesses
  • Lambda Kits
  • Pressure Regulators
  • Crank Triggers

X2 ECU : Part # R050-029


The X2 ECU is a fully sequential 4 cylinder engine control system designed for 4 cylinder applications and V twin motorcycles. The enclosure is extruded 6061 aluminium that is environmentally sealed and features 34 and 26 pin main connectors.

The system is configured with 4 high impedance injector drivers and 4 direct coil drive outputs. Ignitor type coils can also be driven directly.

Main communications is via a high speed serial port. External data loggers or dash displays can be interfaced via a current loop output.

Features

The X2 ECU has the following features:-

  • 4 Injector drivers
  • 4 Ignition outputs
  • Wastegate Control
  • 16 Analog inputs (0-5v)
  • 4 Digital inputs
  • 2 Switch inputs
  • Dual lambda (0-5v)
  • 1 PWM outputs
  • Stepper Motor (IAC)
  • Airshift output
  • Auxilliary output

Software

The X2 supports 3D Fuel, Spark and Phase maps with 40 rpm sites and 20 load sites all user programmable. The ECU can store 2 complete maps that can be switched on the fly. The ECU has a beacon input for recording laptimes and track mapping.

The X2 ECU hosts a full line of control strategies as standard for racing applications including: Closed loop lambda, Boost Control, Drive by Wire, Vanos Control, Pit Limiter, Traction Control, Paddle Shift, Engine Protection, Self Diagnostics and more.

Options

  • 1MB internal logger
  • Drive by Wire
  • EGT amplifiers
  • CAN interface
  • Knock Control

Operational

Enclosure: Extruded 6061 Aluminum
Construction: CMOS surface mount design
Environmental: Environmentally sealed
Connector: Automotive 34 and 26 pin
Dimensions: 4.10" x 4.83" x 1.84"
Weight: 1.0 lbs
Power Supply: 8 to 18 volts transient protected
Power Consumption: 5 watts @ 14 volts
Operating Temp: -40 to +85 deg C continuous
EMI Protection: Exceeds 100V/m >1GHz

Contact

For further information on this and other products please contact us directly at sales@efitechnology.com.


 X2 ECU : Part # R050-029
X

  > Click image to enlarge


DOWNLOADS

  •   Product Data Sheet
  •   Installation Instructions
  •   Wiring Information


LIKE THIS PAGE


Tweet
  • Site map
  • Terms of Use
  • Privacy
  • Contact
  • Products
  • Employment
  • Terms & Conditions
  • About
  • News Articles
  • © Copyright 2024 EFI Technology Inc.