The CFI Controller is a DC Motor controlled pressure regulator that monitors and adjusts the fuel flow to a spray bar installed in the Blower Hat of a Supercharged engine.
The CFI connects to the R16 ECU which in turn outputs a D to A signal to control the programmed fuel pressure at each rpm and boost pressure.
The enclosure is extruded 6061 aluminium that is environmentally sealed and features 2 Autosport connectors.
The CFI has the following features:-
The CFI monitors the blower hat fuel pressure and adjusts the regulator to meet the target value sent from the R16 ECU. The pressure is controled by a DC Motor driver integrated into the CFI Controller.
The pressure target is fully programmable via the 3D table of rpm and load in the R16 ECU. Using the 16 manifold mounted fuel injectors and the blower hat spray bar the R16 can fully control the fuel distribution to the engine.
For further information on this and other products please contact us directly at firstname.lastname@example.org.
> Click image to enlarge